Upholstery:	Clay 12
Variant:	Clay 12/Polished Aluminum
Base color:	Polished Aluminum
Seat finish:	Clay 12
Old item no.:	37547-12
New item no.:	OS3SCD1202
Height:	78.00 cm / 30.70 in
Width:	220.00 cm / 86.60 in
Depth:	84.00 cm / 33.10 in
Seat height:	45.00 cm / 17.70 in
Seat depth:	60.00 cm / 23.60 in
Length between legs:	171.00 cm / 67.30 in
Colli:	1

Download product fact sheet:
- Product fact sheet

The seat and back frame are made using FSC™-certified (FSC-C028824) wood. The seat and back cushions are composed of PU foam and shredded foam with a wadding layer on top. The shredded foam is derived from production off-cuts that would otherwise be discarded. The armrest cushion is made from PU foam. The sofa is fully upholstered in textile, imitation leather, or leather, with leather sourced from selected premium suppliers. Pre-mounted felt glides are included. Loose cushions are available for purchase separately. ?The base is crafted from powder-coated or polished aluminum and made using a minimum of 90% recycled die-cast aluminum. The recycled content is sourced from a mix of post-industrial and post-consumer waste.

General Maintenance: Cushions with loose filling should be shaken and gently patted after use to maintain shape and softness. Upholstery should be vacuumed regularly to remove dust and dirt, helping to prevent premature wear. The upholstery or low suction setting should be used in combination with a soft brush. The chair should be protected from direct sunlight and strong heat sources, as prolonged exposure may affect color and durability. Spilled liquids and stains should be attended to immediately to reduce the risk of permanent stains and marks. Upholstery Care:?Textile: For stains, non-greasy marks should be gently dabbed with a lint-free cloth or sponge wrung out in clean, warm water. If needed, a mild solution of dish soap and water may be used, followed by clean water. For fabric-specific instructions, maintenance guidelines should be consulted directly from the textile supplier (e.g., Kvadrat.dk, Nevotex.dk, Maharam.com, or Gabriel.dk), as cleaning methods vary. Imitation Leather: Should be cleaned with lukewarm, pH-neutral soapy water using a soft cloth or soft brush. Solvents and general chemical cleaners should be avoided; alcohol-based cleaners may be used. The surface should be wiped with a damp cloth to finish. Leather: Leather is a natural material that develops character over time with regular care. Refine Leather, Easy Leather, and Endure Leather: Should be dusted regularly with a dry cloth. The leather should be treated at least four times a year using dedicated leather-care products. For further guidance, ca-mo.com can be consulted. Allure and Grace Leather: Should only be vacuumed with a soft brush. Soap and water should not be used, as they may remove the leather’s velvety finish. Leather grease and chemical products—including saddle soap, general leather cleaners, and household agents—should be avoided. Base: Powder-coated or polished aluminum should be cleaned with a lint-free cloth using lukewarm water. If needed, a mild detergent can be applied to the cloth. The surface should then be wiped dry with a clean, lint-free cloth.

Packaging Height:	0.44 m
Packaging length:	2.24 m
Packaging width:	0.87 m
Gross weight:	68.00 kg
Net weight:	65.00 kg
Shipper colli:	1
Tariff code:	9401610000
EAN:	5713292890147
Estimated lead time:	9-11 weeks

Certificates

• EAC Decl. TP TC 025/2012
• EAC Decl. TP TC 025/2012

PACKAGING INFORMATION

• VIR PLAST
• O MAT PCKG
• PAPER PCKG

Safety & Regulations

• TSCA Title VI -formaldehyde
• Technical Bulletin (TB)
• TSCA Title VI -formaldehyde
• Technical Bulletin (TB)

Strength, Durability & Stability

• ANSI/BIFMA X5.4-2012 Lounge and Public Seating
• ANSI/BIFMA X5.4-2012 Lounge and Public Seating

Product declaration:
- Product declaration

Download Instructions:
- Instructions

Download packshot & lifestyle images:
- Packshot & lifestyle images

Download Architect Files here:
- 2D, 3D & Revit files