Upholstery:	Laze 1
Variant:	Laze 1/Grey
Base color:	Grey
Seat finish:	Laze 1
Old item no.:	41282-GREY_1
New item no.:	STTLBARMLB0102
Height:	86.50 cm / 34.06 in
Width:	150.00 cm / 59.06 in
Depth:	166.00 cm / 65.35 in
Seat height:	42.00 cm / 16.54 in
Seat depth:	126.00 cm / 49.61 in
Colli:	1

Download product fact sheet:
- Product fact sheet

Back cushion: a single outdoor-suited foam core wrapped in wadding, enclosed in an inner lining and finished with outdoor-suited upholstery. The Lounge Bed comes with two loose cushions for extra back support. Extra cushions can be purchased separately. Seat cushion: Multiple layers of outdoor-suited foam provide enhanced support and comfort. The foam is wrapped in wadding and an inner lining and then finished with outdoor-suited upholstery. An anti-slip feature keeps the cushions securely in place. Bent steel tubes, rods, and plates make up the frame, which is electro-galvanized, primed, and powder-coated. The armrests are made from FSC™-certified (FSC-C028824) sapele mahogany wood. The webbing is made of 72% PP (Polypropylene) and 28% Synthetic Rubber.

Textile – General Maintenance: For stains, non-greasy marks should be gently dabbed with a lint-free cloth or sponge wrung out in clean, warm water. If needed, a mild solution of dish soap and water may be used, followed by dabbing with clean water. Textile – Stain treatment: Stains should be treated promptly, as older stains are more difficult to remove. Professional furniture cleaning is recommended for set-in stains. Any treatment method should be tested on a concealed area before use. Several light applications are recommended rather than one concentrated treatment, and the process may be repeated if necessary. Heat should never be applied, as it may set the stain, and bleach-containing products should be avoided, as they can cause discoloration. The fabric should not be over-saturated, and water should not be allowed to pool in the seams. Excess moisture should be absorbed immediately. For oil- or water-based stains, a clean, soft white cloth, natural sponge, or nylon soft-bristle brush should be used with a water-free dry-cleaning solvent. Brushing should be carried out with light, quick strokes from the outer edge toward the center, taking care not to scrub. For insoluble stains—such as chewing gum or candle wax—a plastic bag filled with ice should be applied until the material becomes brittle, then carefully lifted with a clean, dull, flat knife. Extra care should be taken with dark textiles to avoid visible light marks from color transfer. Excessive rubbing should be avoided, and the textile should be allowed to dry thoroughly before vacuuming or reuse. Powder-coated surfaces: The surface should be cleaned with a cloth dampened with water. If needed, a mild detergent or dish soap can be used. Concentrated and abrasive cleaning agents should be avoided, as these may damage the finish. Any liquids, grease, or residues should be removed immediately to reduce the risk of stains and marks. Surfaces should always be wiped dry with a clean cloth afterward. In line with ECDC guidelines, powder-coated surfaces can tolerate regular disinfection using 70% ethanol. Care should be taken to avoid impacts from hard objects, as lacquered surfaces may scratch or chip. Wooden surfaces: Armrests should be cleaned with a cloth dampened with water, following the direction of the wood grain. If needed, a mild detergent or dish soap can be used. Concentrated or abrasive cleaning agents should be avoided as they can damage the finish. The surface should be wiped with a clean, damp cloth and dried thoroughly with a soft, dry cloth. Any liquids, grease, or residues should be removed immediately to minimize the risk of stains and marks. It is recommended that the wood be cleaned once or twice a year using a dedicated outdoor wood cleaning product to remove algae and dirt. The product instructions should be followed carefully. If left untreated, the wood will develop a natural silver-grey patina over time. This visual change does not affect durability or structural quality. If the original warm tone is preferred or needs to be intensified, a clear oil suitable for outdoor use should be applied regularly. Advice on suitable wood cleaning or oiling products can be obtained from a local hardware store. Over time, screws that connect the armrests to the frame may require tightening. Small splinters may be raised by prolonged exposure to outdoor conditions and can be gently smoothed with light sanding using 240-grit or finer sandpaper. Covers: A protective cover is recommended to shield the furniture from weather-related wear, particularly during the winter months. Before the cover is applied, it must be ensured that both the furniture and the interior of the cover are completely dry.

Packaging Height:	0.78 m
Packaging length:	1.70 m
Packaging width:	1.55 m
Gross weight:	60.00 kg
Net weight:	42.00 kg
Shipper colli:	1
Tariff code:	9401710000
EAN:	5713292855399
Estimated lead time:	9-11 weeks

Certificates

• Oeko-Tex® Standard 100 or CertiPur
• Oeko-Tex® Standard 100 or CertiPur

PACKAGING INFORMATION

• VIR PLAST
• PAPER PCKG

Safety & Regulations

• Technical Bulletin (TB)
• Technical Bulletin (TB)

Strength, Durability & Stability

• EN 16139-L2 Extreme use Non-domestic seating
• EN 581-1 Gen. safety & EN 581-2 Mech. safety seat
• EN 16139-L2 Extreme use Non-domestic seating
• EN 581-1 Gen. safety & EN 581-2 Mech. safety seat

Product declaration:
- Product declaration

Download Instructions:
- Instructions

Download packshot & lifestyle images:
- Packshot & lifestyle images

Download Architect Files here:
- 2D, 3D & Revit files